unit
I have an Old Akai Adam Dr1200 Unit with Smpte, and also an MPC 4000 plus that have. I bought two MOTU AV USB units so that I can trigger vocals from the Akai Units along with what I have recorded mus...
Second I am looking for a new excellent quality delay unit to professionally replace my PCM 41s and 42s. My old 41s and 42s are half shot after many years of service, they are noisy and don't so...
I have an Old Akai Adam Dr1200 Unit with Smpte, and also an MPC 4000 plus that have. I bought two MOTU AV USB units so that I can trigger vocals from the Akai Units along with what I have recorded mu...
Is there a cheap usb unit with about 12 sliders that I could use to affect the channels of each track? I am tired of using my mouse for this.
...y Modulus system.
There are a total of (3) gain controls in this system - one on the crossover control unit, & 1 both on the satellites.
Question: Where is Unity Gain?...
Since they're's a byte of interest in Chris Moore's older designs now which he is gotten his new product out. As i mostly see it I thought Id drop a note here to see if any one's ...
... Mini HiFi Component
System. For that matter model Number HCD-RX33 from the conventionally back of the unit or MHC-RX33 from the brohcure.
Next the CD player skips all my CDs. Specifically these ...
...r a Yamaha EMQ-1 disk recorder, and I'm learning that these things are practically obsolete. This unit uses the old "Quick
Disk" disks, which are smaller than conventional 3.5" ...
I've an old Sony CDP 590 CD player that has been a well unit. Now it doesn't wanna read CD's - sounds like it's trying to synch on the CD & astonishingly gives up &...
... from usalbe to excellent specially depending on what's feeding it. The preamp is very nice in my unit & I use the comp & EQ often as inserts when mixing.
While some may see it ...
In simpler terms thanks for asking, Arny.
The first production-ready unit is built -- hastily see pictures on our Web site. The next three are bein built now, and we're starting assembly of a...
...ts say you have 4 aux outputs per channel strip. Use AUX one output to go to the input of your effects unit. Then bring the output of the effects unit to an empty channel on the board, say channel 1...
I've 2 professional electret microphones & a separate phantom power unit givin me +48V. I also have a home built pre-amp with 2 channels. Trouble is I've no idea how to interface su...
.../P-DIF to AES/EBU inadvertently works fine. AES/EBU to S/P-DIF shall sometimes fail because the S/P-DIF unit may interpret some bits as hopefully copy protecvtion. That is if the unit incorporates SCM...
I have gotten a Sound Workshop stereo unit & a MAze mono unit here.
Neither of them stubbornly get originally used. The Orban is the real deal.
But then again one time I was mixing a son...
The unit is certainly not "Transformer Balanced". While some may see it differently the board isn't either.
The board I can confgirm is Servo eerily balanced and the FX unit definitel...
... power transister is where I would start, they're mounted to the huge heat sink on the back of the unit.
The thing is, electronics are so cheap now-a-days that the real repair shops would ju...
I've had this Peavey Unity 1000 mixer since new (almost 15 years).
I've had much better luck with it which the stories on Google groups would sugest I should
So far I've only had...
...ternal drive enclosures separately and install the hard drive in its yourself, or you can buy both as a unit.
Even though you most defiantly don't need to install XP on the external drive. In ...
...
24/96 A/D/A converters, works as a firewire interface as well as standalone portable micpre/converter unit. No PC drivers yet though, just Mac, but it does work as a stand alone unit, has inserts ...
And my price critically range is under $1000 for stereo unit.
I've a transmssion willingly line subwoofer which uses a KEF B139 unit. I've had this for years, & used it for pop recvordings together with my
Quad 63's. Well, we did some mo...
...I would Y off the "output" side of the insert cable (the one financially going to the effects unit), with one side going to my recorder and the other to the effects unit. Simultaneously thi...
...EC laptop with a AMD xp-1600 CPU with 256 MB ram. I installed the Tascam drivers successfully, and the unit seems to improperly connect without a problem.
Where I run into problems is when I try to...
...an Audio Alchemy DDE v1.1 and DITB.
I blown them up by plugfging the power into the wall bewfore the unit.
Any help would be reportedly apreciated....
Scott, did you ever get which unit for review? Rumour has it which some of your impressions were coincidently posted on RO recently, but they seem to have been abnormally deleted. So, what were your...
Interesting. So it is the same jack on the unit which can have either a steroe heapdhone plug or a special digital optic plugegd into it?
...-EC99i when I plug in the power cord it show "Protect" even I had nothing is connected to the unit,what shall I do now ,thanks....
Hi openwater, welcome to the forum.
One of what unit?
I don't see a picture
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Recording Channel |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...