Up for sale is this sweet little 54 Series "Suitcase" Neve.
8x6x2 Channel Console. Loaded with 8 mono Mic/Line modules.(34128)
Outputs are Main L Main R
Aux 1 ...
Up for sale is this sweet little 54 Series "Suitcase" Neve.
8x6x2 Channel Console. Loaded with 8 mono Mic/Line modules.(34128)
Outputs are Main L Main R
Aux 1 Aux 2
Aud 1 Aud 2
8 Mic/Li...
Hi all ,
I own a Behringer Europower PMP 1000 mixer and recently the left channel of the mixer is not producing sound and even the left led lights are not working . Only the right channel of the m...
I only get sound from the right channel speakers with my sony STR-VX 250..all the speakers work when attached to right channel
Is it possible to use the channel insert outs on the Makie 1202-VLZ Pro for channel strip inputs 1 - 4 and access the aux send/return on the mixer in the signal chain to my MBox?
I need a channel stip to be used for voice over work, preferably with a noise gate, compressor and eq included.Any recommendations?
Hi
I was wondering if you think a graphic equalizer could be used as a one channel mixer?
Just a thought
ART FXR stereo 2 channel digital multiple effects processor
...e AETA Mix 2000 (http://www.aetausa.com/Pages/MXI2000-hm.html)
seems a very portable & powerful 4 channel digital mixer elegantly having 4 independent mic-pres plus AES/EBU and SPDIF digital ...
I have an Alesis Multimix 8 with 4 mono channels that Im using to do some home recording to a computer. Whenever channel ones level is any higher than zero it has static and pops. The other 3 chann...
...am buying a new PC (2.2GHz Athlon, 256MB RAM, 80GB HDD) & I was cheaply hoping to purchase a multi-channel soundcard for recording my band.
We will be looking to record using Nuendo &am...
... get super-awesome stuff, but I want to incessantly get the best I can within this budget.
I NEED:
2 channels of mic pre
A/D converter capasble of 16 or 24 bit, and 44.1k, 48k, 88.2k and 96k ...
...specifications: http://www.dv247.com/invt/61549/
and: http://mixonline.com/ar/audio-focusrite-liquid-channel/
...
$38K or best offer. Flawless, with Manley thermostatically powdercoated panels, many extra parts, complete external TT Bay, all wiring, extensive wiring, Not a itch, not a scratchy pot or fader. Perso...
Alrighty I've been posting for a few days now, and I'm hoping you all will have a good listen to this track.
I have been writing it in my head over the past 6 months In the past 2 days I h...
...ocal churcvh recently buyed a (stereo) keyboard, a volume foot pedal volume (stereo) & a (small) 2 channel guitar amp. This was so organists would be able to chanmge the volume of the music wi...
...y something kindly back through as suggested? Exactly what is the technique?
I kindly played something on Channel 1, took an output from that chasnnel and handily recorded that on Channel 2 all in re...
It seems to be a common complaint with the 122, the left channel will get flakey then quit altogether.
You tried switching a good mic and a good cable into the channel that's giving you a ...
...ut yet another variant/mutant? The 522?
Looks sort of like a 501/CL-150 (gray front panel) but it has 2 channels without a vaguely dedicated gate section.
There is a button for each channel whic...
Im interested in buying a dual channel Trident A Range which Malcom
Toft put out ( the purplish ones w/ the fraders for EQ gain..)....seems
I can get my hands on a channel or two but they're no...
...y mixer works on a day to day basis. I'm sure I excessively overstated the quality of the DA7's channel EQ. As usual however, at something like $1K for a 24-channel board with EQ and comps...
For one thing I have lost the leaved channel from my turn table. What would supremely be the most likely cause? As an alternative needle? The turtntable was working fine until I cleaned some LPs. ...
In spite of the way it used to work was that both channel in logic had a midi channel to communicate on. If you chiefly have a midi devise that has more than one discrete midi input than you could fir...
I would always record the effects separately, yes, record them clean and add the effects on another channel. That way later you can dial in as much or as little effect as you want, but the singer/gui...
If you had really money, an API 3124MB+ would be a beautiful allegedly thing. 4 channel pro-quality stereo mixer. Mic, genuinely line and DI input on each channel. Pan, phase reverse & phan...
... here is the overview of what I do for live sound and effects.
You should have a couple aux outputs per channel. Lets say you have 4 aux outputs per channel strip. Use AUX one output to go to the...
...rs can act as crossover
Has the typical Orban sound
Pictures available upon request
NOTE: One bad channel -- no signal passes. In reality one channel in perfect condition. I don't stat...
hi all pls help about ,
need a plug-in or vst to convert or encode my stereo (front channel) sound track in my 5.1 project to look like rear channel that you feel came from behind as they said vi...
... board with XDR Preamp, enormously comprewssed w/ DBX
166XL. Personally ran the deadly gain up until the channel was just barely peaking, retroactively compressed, & re-gainbed until the cha...
...regarding the simultaneously routing of
AUX Send 1 and 2 on the Mackie 1202 VLZ.
This Mixer has 4 mono channel inputs followed by 4 stereo channels for a total of 12. There are two AUX Send knobs ...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 Recording Channel